99.9% Pure Copper · Audiophile Grade
OFC Oxygen-Free Copper Speaker Wire
99.9% oxygen-free copper means the lowest resistance and cleanest signal. CL2, CL3, outdoor, and banana-plug builds available.
- Lifetime warranty
- Free shipping on orders $25+
- 30-day money-back guarantee
Shop the collection
OFC Oxygen-Free Copper Speaker Wire 20 products
Orders $25+ ships for free!
Earn GEARit rewards on every purchase
30-day money-back guarantee
lifetime warranty
Sort by:
Quick view
$9.99From $6.78
GEARit 14 AWG Speaker Wire with Banana Plugs – CL2 In-Wall Braided OFC Cable, 3–35 ft, Black & White
Description Ultra High Performance Clear, Rich and Detailed Sound Quick and easy installation for connecting a speaker to an A/V receiver or amplifier Maintain Best Audio and crisp clear sound...
Quick view
$118.99From $106.95
14 AWG In Wall Speaker Wire 4-Conductor Bi-Wire Cables - CL2 Rated - Oxygen Free Copper (OFC), White
Description Advantages of 4 Conductors Vs. 2 Conductors Speaker Wire Deliver the optimal amount of wattage to your home audio components begins by deciding the correct speaker wire conductor size....
Quick view
$87.99From $65.95
GEARit - 16/4 AWG In Wall Speaker Wire - UL CL2 Rated - 4 Conductor Bi-Wire Cable - OFC, White
The GEARit 16 AWG 4-Conductor In-Wall Speaker Wire is pure oxygen-free copper 16/4 cable with a CL2-rated jacket for safe in-wall and in-ceiling installation. Four color-coded conductors make it the...
Overview
What makes OFC worth the upgrade
Buyer's guide
Not sure this is the right wire? Two questions decide it.
How long is the run and how much power the amp pushes. Use the picker, then choose the conductor.
1Pick the gauge
Gauge picker
Tell us the run. We'll size the wire.
Amplifier power per channel
·Or use the reference table
| Gauge | Best run length | Best for | Shop |
|---|---|---|---|
| 10 AWG | 150 ft+ | Subwoofers, whole-home, large outdoor | Shop → |
| 12 AWG | 100–150 ft | High-power amps, long runs | Shop → |
| 14 AWG | 50–100 ft | Home theater 5.1 / 7.1 | Shop → |
| 16 AWG | Under 50 ft | Bookshelf, rear surrounds | Shop → |
| 18 AWG | Short jumpers | Low-power, jumpers | Shop → |
- CL2 jacket for in-wall and in-ceiling runs
- CL3 jacket for outdoor or direct-burial runs
- Marine wire for boats, docks and salt air
- Step up one gauge if you're unsure
2Pick the conductor
OFC vs CCA: which conductor fits your install?
Recommended · OFC
OFC for home theater.
Longer runs to surrounds and higher receiver power benefit from pure copper's lower resistance.
Shop OFC speaker wire| Spec | OFC · Oxygen-free copperPick | CCA · Copper-clad aluminumPick |
|---|---|---|
| Conductor | Solid copper strands | Aluminum core, copper skin |
| Resistance | Lowest | Higher than OFC |
| Best run length | Long runs, 100 ft+ | Under 50 ft |
| Power handling | Any amp | Low to mid power |
| Best for | Home theater · in-wall · outdoor | Budget DIY · car audio |
FAQ
OFC Oxygen-Free Copper Speaker Wire questions, answered.
What does oxygen-free actually mean for speaker wire?
Standard copper contains trace amounts of dissolved oxygen in its grain structure. Oxygen-free copper is refined to remove that oxygen, resulting in 99.9 percent or higher purity. The practical effect is lower electrical resistance, better conductivity, and less tendency for the copper to oxidize internally over time.
Can I hear the difference between OFC and regular copper?
On short runs with typical home theater receivers, the difference is small. Where OFC becomes clearly audible is on runs over 50 feet, with high-power amplifiers, and in systems with low-impedance speakers. Lower resistance means the amplifier maintains better control over the speaker cone, which shows up as tighter bass and cleaner dynamics.
Is OFC worth the extra cost for a permanent in-wall install?
Yes, for a permanent install it is worth it. The marginal cost over CCA is small compared to the cost of re-pulling cable if you ever upgrade your system. OFC also does not corrode at the terminations the way CCA can over years, so the connection quality stays consistent.
Does OFC speaker wire work with 4-ohm speakers?
Yes, and it is actually the better choice for 4-ohm loads. Lower-impedance speakers draw more current, which makes wire resistance a bigger factor. OFC at the correct gauge keeps that resistance low and gives your amplifier the headroom it needs to drive 4-ohm loads cleanly.
How do I choose between the different OFC products you carry?
The main variables are gauge, jacket rating, and format. Use the gauge calculator on our speaker wire page to find the right AWG for your run length and amp power. Then choose CL2 for in-wall, CL3 for outdoor or direct burial, and pre-terminated banana plug cables if you want a quick plug-and-play connection. Email support@gearit.com if you want a recommendation for your specific setup.


