Tinned Copper · Salt-Spray Rated

Marine Speaker Wire

Tinned-copper conductors resist salt spray, UV, and high-humidity environments. Built for boats, docks, and marine audio systems.

  • Lifetime warranty
  • Free shipping on orders $25+
  • 30-day money-back guarantee

Shop the collection

Marine Speaker Wire 1 products

Orders $25+ ships for free!

Earn GEARit rewards on every purchase

30-day money-back guarantee

lifetime warranty

Sort by:
Marine Wire - 6 AWG / 1 Conductor / 50 Feet, image 1
Quick view

GEARit - Marine Wire, Tinned Copper Boat Cable – 6, 8, 10, 12, 14, 16 AWG, 1 & 2 Conductor, 20/50/100/200 ft

$38.99From $24.95
4.6 (239)
  • Tinned Copper Conductors
  • Marine-Grade PVC Jacket
  • 600V CL3 Rated
  • Saltwater, UV & Oil Resistant

Overview

Why marine wire uses tinned copper

Marine environments are hostile to standard speaker wire in ways that aren't obvious until the connections fail. Salt air doesn't just corrode — it accelerates galvanic corrosion between dissimilar metals at every termination point. Humidity cycles cause bare copper to oxidize and increase resistance. UV destroys standard jacketing within one or two seasons.

GEARit marine speaker wire addresses all three failure modes. The conductors are tinned — a thin, uniform layer of solder alloy fused to every copper strand. Tinning creates a barrier between the copper and the environment, drastically slowing the oxidation and corrosion process. It's the same reason all quality marine electrical wire is tinned.

The jacket uses a marine-grade PVC compound rated for UV exposure, high humidity, and salt spray. The white color reflects rather than absorbs heat, keeping the cable cooler in direct sun on open decks.

Available in 10, 12, 14, and 16 AWG in 50 ft lengths — sized for typical marine stereo installations from compact wakeboard systems to larger tournament-style boat builds.

Buyer's guide

Not sure this is the right wire? Two questions decide it.

How long is the run and how much power the amp pushes. Use the picker, then choose the conductor.

1Pick the gauge

Gauge picker

Tell us the run. We'll size the wire.

50 ft
Amplifier power per channel
Recommended 14 AWG

The home-theater sweet spot for 5.1 / 7.1 setups.

Shop 14 AWG speaker wire

·Or use the reference table

GaugeBest run lengthBest forShop
10 AWG150 ft+Subwoofers, whole-home, large outdoorShop →
12 AWG100–150 ftHigh-power amps, long runsShop →
14 AWG50–100 ftHome theater 5.1 / 7.1Shop →
16 AWGUnder 50 ftBookshelf, rear surroundsShop →
18 AWGShort jumpersLow-power, jumpersShop →
  • CL2 jacket for in-wall and in-ceiling runs
  • CL3 jacket for outdoor or direct-burial runs
  • Marine wire for boats, docks and salt air
  • Step up one gauge if you're unsure

2Pick the conductor

OFC vs CCA: which conductor fits your install?

Recommended · OFC OFC for home theater.

Longer runs to surrounds and higher receiver power benefit from pure copper's lower resistance.

Shop OFC speaker wire
SpecOFC · Oxygen-free copperPickCCA · Copper-clad aluminumPick
ConductorSolid copper strandsAluminum core, copper skin
ResistanceLowestHigher than OFC
Best run lengthLong runs, 100 ft+Under 50 ft
Power handlingAny ampLow to mid power
Best forHome theater · in-wall · outdoorBudget DIY · car audio

FAQ

Marine Speaker Wire questions, answered.

Why does marine speaker wire use tinned copper instead of bare copper?
Salt air causes bare copper to oxidize and corrode much faster than it would indoors. The thin layer of tin bonded to each copper strand acts as a barrier against salt, moisture, and humidity, keeping the conductor clean and resistance stable over years of marine use.
Is this wire safe to use on a saltwater boat?
Yes, that is exactly what it is designed for. The tinned OFC conductors and marine-grade PVC jacket are built to handle saltwater spray, high humidity, and direct UV exposure on open decks.
What gauge should I use for my boat's stereo system?
14 AWG covers most marine stereo installs, including runs up to 20 feet to cabin speakers and cockpit speakers at standard head unit power levels. Use 12 AWG for subwoofer connections or runs over 25 feet, and 10 AWG for high-power amplifiers driving multiple speaker zones.
Can I use this wire for a pontoon boat or dock speakers?
Yes. Pontoon boats and dock installations are exactly the environment this wire is built for. The jacket handles extended UV exposure and the tinned conductors resist the corrosion that comes from being near water even when the system is not in use.
Do you offer a warranty on marine speaker wire?
Yes, GEARit marine speaker wire carries a lifetime warranty against defects in materials and workmanship. Contact [email protected] if you have any issues and we will take care of it.