13% off
- Lifetime warranty
- Free shipping on orders $25+
- 30-day money-back guarantee
Which length do I need?
- 3–6 ftReceiver to front speakers on the same console or shelf
- 10–15 ftCenter channel or front speakers across a TV wall
- 25–35 ftRear surrounds in a typical living room
- 50 ft +In-wall, ceiling or outdoor runs; consider a bulk spool
Tip: measure the path the wire will follow, not the straight line, and add 10–15% for slack.
Description
Everything you need to wire up to six speakers in one box. Each GEARit kit pairs a spool of 2-conductor CCA speaker wire with 12 screw-lock banana plugs (6 pairs), so you can cut, strip and connect a full home theater, stereo or car audio system without buying parts separately.
Choose your gauge and length
- 12 gauge – lowest resistance for long runs, subwoofers and higher-power speakers
- 14 gauge – the all-round choice for home theater surrounds and bookshelf speakers
- 16 gauge – for shorter runs and lower-power speakers
- 50 ft or 100 ft spool to match the size of your setup
Built for easy installs
- Wire and plugs in one kit – 12 banana plugs complete six speaker connections
- Measure from the spool – sequential foot markers on the jacket for accurate cuts
- Polarity at a glance – red tracer stripe marks positive and negative
- Flexible PVC jacket – routes around furniture and through tight vehicle interiors without kinking
- Copper-clad aluminum (CCA) – lighter and more affordable than pure copper, with reliable signal for everyday audio
What's in the box
- 1 spool of 2-conductor CCA speaker wire (12, 14 or 16 AWG; 50 or 100 ft), black with red tracer
- 12 banana plugs (6 pairs), screw-lock type
GEARit Speaker Wire with 12 Banana Plugs – 12, 14 or 16 Gauge CCA, 50 or 100 ft, Black, 6-Pair Kit
Specifications
Built to spec.
| Gauge | 16 AWG |
| Conductor | Copper-clad aluminum (CCA) |
| Conductors | 2-conductor |
| Gauge | 12 AWG, 14 AWG, 16 AWG |
| Length | 50 Feet, 100 Feet |
| Brand | GEARit |
| Warranty | Lifetime warranty |
Best for
When to choose 16 AWG
Bookshelf speakers and rear surrounds with runs under 50 ft.
- Budget-friendly for short indoor runs
Why this wire
Made for clean installs and clear sound.
12 Banana Plugs Included
Pick the Right Gauge
Complete the install
Pairs well with
13% off
10% off
GEARit
12 AWG In Wall Speaker Wire - CL2 Rated - Oxygen Free Copper (OFC), White
3 options
Buyer's guide
Not sure about gauge? Two questions decide it.
How long is the run and how much power the amp pushes. Use the picker, then choose the conductor.
1Pick the gauge
Gauge picker
Tell us the run. We'll size the wire.
Amplifier power per channel
·Or use the reference table
| Gauge | Best run length | Best for | Shop |
|---|---|---|---|
| 10 AWG | 150 ft+ | Subwoofers, whole-home, large outdoor | Shop → |
| 12 AWG | 100–150 ft | High-power amps, long runs | Shop → |
| 14 AWG | 50–100 ft | Home theater 5.1 / 7.1 | Shop → |
| 16 AWG | Under 50 ft | Bookshelf, rear surrounds | Shop → |
| 18 AWG | Short jumpers | Low-power, jumpers | Shop → |
- CL2 jacket for in-wall and in-ceiling runs
- CL3 jacket for outdoor or direct-burial runs
- Marine wire for boats, docks and salt air
- Step up one gauge if you're unsure
2Pick the conductor
OFC vs CCA: which conductor fits your install?
Recommended · OFC
OFC for home theater.
Longer runs to surrounds and higher receiver power benefit from pure copper's lower resistance.
Shop OFC speaker wire| Spec | OFC · Oxygen-free copperPick | CCA · Copper-clad aluminumPick |
|---|---|---|
| Conductor | Solid copper strands | Aluminum core, copper skin |
| Resistance | Lowest | Higher than OFC |
| Best run length | Long runs, 100 ft+ | Under 50 ft |
| Power handling | Any amp | Low to mid power |
| Best for | Home theater · in-wall · outdoor | Budget DIY · car audio |
T
Did not arrive with the Banana Plugs. Save yourself time and buy a different brand that will arrive with all components purchased.
J
I haven't hooked it up, so I can't comment on performance. A couple of points before you buy, though.It does NOT come on a wire reel, which is disappointing and not user friendly.It is copper clad aluminum, not copper as the description indicates.See pictures.
K
I ordered these to give a nicer look but the banana plugs are to large for the positioning of the terminals.
R
The wire is what was expected. However I ordered the wrong jacks for my speakers. I needed the 2mm pins for the clip jacks that’s on my speaker and receiver.
r
Cable was fine, flexible and easy to prep. Unfortunately the banana plugs did not fit in my receiver’s jacks.
A
Very happy with this speaker cable. Great quality will buy again.
S
Great kit for the money!! Big wires big power Simple to assemble
J
Perfect wiring and banana plugs for the theater setup I’m building
R
Take your time map out your speaker layout measure the wire leaving some slack so you can move your equipment without disconnecting everything. Cut and label each wire strip the ends with a crimper then attach all the banana plugs. Nice to have different plugs colors for positive and negative
F
Esperaba más con respecto de lo anunciado. El cable se aprecia de baja calidad.
B
I bought the GearIT 14 Gauge Speaker Wire (50 Feet) with Banana Plugs (6 Pairs) for my new Klipsch RP-8000F II floor speakers and center speaker. The wire feels really good—nice and thick, flexible, and easy to work with. The banana plugs are made well, solid and secure, and I liked that it came with a mini flat head screwdriver to tighten them up. Hooked everything up without any hassle, and my speakers sound great—clear, powerful, and way better than before. Solid quality for the price. I would definitely buy it again if I need more!
P
Quality feel. The connectors are nice
M
Perfect for what I need to accomplish. Easy to use, decent quality.
A
Great addition to my sound system.PROS: easy instructions, came with all the tools, and quality speaker wire with banana plugs!CONS: none that I can see.
R
Excelente material
S
Got this wire kit to replace VERY OLD wire on my Bose 201s. WOW! What a difference in sound quality! High highs, low lows, mid mids, beautiful. The easy to connect banana clips allowed me to make the wires the exact lengths I needed. No 10 extra feet of wire to try to stash.I just ordered the same kit again as I'm adding speakers to my system.
D
It's CCA--Copper Clad Aluminum. It's garbage wire for anything other than power (and even then it has to be down-rated.) Google it yourself. I wouldn't even use it for clothes line.
A
great product,
J
The wire is terrific. The banana plugs, this variety, I've not figured out. I had to go to Amazon Basics.
t
Great product
r
Too cheap and total different from AD. So urgly.
A
Worked well! Easy to connect. Would have been 5 stars except was unable to unscrew one of the connectors.
J
Works as intended, cheap.
.
Very sturdy wire. I used it for the rear surround Atmos speakers on my 9 channel system. Each of the two speakers takes 2 channels. Wanted something very sturdy , durable because the wires had to go under the carpet. I feel like these will last a long time. Worth the money.
B
Very good quality speaker wires and connectors.
B
Those bananas were fantastic! I had purchase some earlier and they did not secure the wiring. With the two screws the connections were solid. i purchase a 5.1 audio system. the last thing I wanted was to have them come apart.
D
Exactly what it claims to be. Good quality cable. Really good design on the banana plugs. Recommend.
S
Speaker wire great, but no banana clips were included in the package, as per advertised
A
Great value, great wire with foot markings and discrete red/black markings
B
Fácil de instalar y de buena calidad
FAQ
Speaker wire questions, answered.
How do I choose the right length?
Measure the path the wire will actually follow, around furniture, along baseboards or through walls, then add 10–15% for slack. If you're between two lengths, go longer.
What gauge speaker wire do I need?
Under 50 ft, 16 AWG is fine. For 50–100 ft or higher-power amps, step up to 14 AWG. For runs over 100 ft or subwoofers, use 12 AWG. In-wall installs need a CL2 or CL3 jacket.
Can I run this speaker wire in walls?
Wire rated CL2 or CL3 is made for in-wall and in-ceiling installation. Check the rating in the specs above and on the jacket.
Is OFC better than CCA?
Oxygen-free copper has lower resistance than copper-clad aluminum, which matters most on long runs and at higher power. CCA is a budget option for short indoor runs.
Do I need banana plugs?
No. Bare wire works on any speaker terminal. Banana plugs make swaps faster and prevent fraying.
