13% off
$26.15
- Lifetime warranty
- Free shipping on orders $25+
- 30-day money-back guarantee
Which length do I need?
- 3–6 ftReceiver to front speakers on the same console or shelf
- 10–15 ftCenter channel or front speakers across a TV wall
- 25–35 ftRear surrounds in a typical living room
- 50 ft +In-wall, ceiling or outdoor runs; consider a bulk spool
Tip: measure the path the wire will follow, not the straight line, and add 10–15% for slack.
Description
GEARit 14 AWG 2-conductor copper-clad aluminum (CCA) speaker wire connects outdoor and in-wall audio systems with a flexible CL3-rated black jacket.
- Choose 20, 100, 150, or 200 Feet to suit your speaker run.
- Flexible PVC jacket supports outdoor, direct-burial, and in-wall installations.
- Sequential foot markers simplify measuring and cutting.
- Red and black conductors help maintain polarity.
- Easy to cut and strip for compatible speaker terminals, banana plugs, or spade connectors.
14 AWG 2-Conductor CCA Outdoor Speaker Wire, CL3 Rated
$26.15
Specifications
Built to spec.
| Gauge | 14 AWG |
| Conductor | Copper-clad aluminum (CCA) |
| Conductors | 2-conductor |
| Jacket rating | CL3 — in-wall rated, outdoor / direct-burial jacket |
| Length | 20 Feet, 100 Feet, 150 Feet, 200 Feet |
| Brand | GEARit |
| Warranty | Lifetime warranty |
Best for
When to choose 14 AWG
Home theater 5.1 / 7.1 systems with runs of 50–100 ft. The most common choice.
- Built for outdoor and buried runs
- Budget-friendly for short indoor runs
Why this wire
Made for clean installs and clear sound.
Audio inside and outside
The Wire with Limitless Reach
Copper-clad aluminum conductors
A Flexible Connection
Designed for clean, simple routing
Install with Confidence
Direct Burial Audio
One Cable, Many Uses
Complete the install
Pairs well with
13% off
10% off
GEARit
12 AWG In Wall Speaker Wire - CL2 Rated - Oxygen Free Copper (OFC), White
3 options
Buyer's guide
Not sure about gauge? Two questions decide it.
How long is the run and how much power the amp pushes. Use the picker, then choose the conductor.
1Pick the gauge
Gauge picker
Tell us the run. We'll size the wire.
Amplifier power per channel
·Or use the reference table
| Gauge | Best run length | Best for | Shop |
|---|---|---|---|
| 10 AWG | 150 ft+ | Subwoofers, whole-home, large outdoor | Shop → |
| 12 AWG | 100–150 ft | High-power amps, long runs | Shop → |
| 14 AWG | 50–100 ft | Home theater 5.1 / 7.1 | Shop → |
| 16 AWG | Under 50 ft | Bookshelf, rear surrounds | Shop → |
| 18 AWG | Short jumpers | Low-power, jumpers | Shop → |
- CL2 jacket for in-wall and in-ceiling runs
- CL3 jacket for outdoor or direct-burial runs
- Marine wire for boats, docks and salt air
- Step up one gauge if you're unsure
2Pick the conductor
OFC vs CCA: which conductor fits your install?
Recommended · OFC
OFC for home theater.
Longer runs to surrounds and higher receiver power benefit from pure copper's lower resistance.
Shop OFC speaker wire| Spec | OFC · Oxygen-free copperPick | CCA · Copper-clad aluminumPick |
|---|---|---|
| Conductor | Solid copper strands | Aluminum core, copper skin |
| Resistance | Lowest | Higher than OFC |
| Best run length | Long runs, 100 ft+ | Under 50 ft |
| Power handling | Any amp | Low to mid power |
| Best for | Home theater · in-wall · outdoor | Budget DIY · car audio |
FAQ
Speaker wire questions, answered.
How do I choose the right length?
Measure the path the wire will actually follow, around furniture, along baseboards or through walls, then add 10–15% for slack. If you're between two lengths, go longer.
What gauge speaker wire do I need?
Under 50 ft, 16 AWG is fine. For 50–100 ft or higher-power amps, step up to 14 AWG. For runs over 100 ft or subwoofers, use 12 AWG. In-wall installs need a CL2 or CL3 jacket.
Can I run this speaker wire in walls?
Wire rated CL2 or CL3 is made for in-wall and in-ceiling installation. Check the rating in the specs above and on the jacket.
Is OFC better than CCA?
Oxygen-free copper has lower resistance than copper-clad aluminum, which matters most on long runs and at higher power. CCA is a budget option for short indoor runs.
Do I need banana plugs?
No. Bare wire works on any speaker terminal. Banana plugs make swaps faster and prevent fraying.
