13% off
- Lifetime warranty
- Free shipping on orders $25+
- 30-day money-back guarantee
Which length do I need?
- 3–6 ftReceiver to front speakers on the same console or shelf
- 10–15 ftCenter channel or front speakers across a TV wall
- 25–35 ftRear surrounds in a typical living room
- 50 ft +In-wall, ceiling or outdoor runs; consider a bulk spool
Tip: measure the path the wire will follow, not the straight line, and add 10–15% for slack.
The GEARit 12/2 OFC Outdoor Speaker Wire is UL CL3 rated for direct burial and in-wall installation, built for the longest runs and most powerful systems. Heavy 12 AWG pure copper conductors keep resistance low over distance, so outdoor speakers, subwoofers and high-power home theater get full, clean power.
Features
- UL CL3 rated for direct burial and in-wall: Bury it directly in the ground or run it through walls and ceilings while meeting fire safety requirements.
- 99.9% oxygen-free copper: Lower resistance than CCA wire for clear, detailed sound and better corrosion resistance outdoors.
- 12 AWG for long, high-power runs: Ideal for runs of 100–150 ft, high-power amplifiers and subwoofers, with minimal power loss.
- Color-coded conductors: Easy polarity identification at both ends.
- Sequential foot markings: Printed on the jacket so you can measure and cut accurately in the field.
- Heavy-duty filled jacket: Tough enough for burial, conduit and harsh outdoor conditions. The jacket is firm by design, so warm the spool before pulling in cold weather.
Common Uses
- Long landscape, backyard and garden speaker runs
- Pool, patio and deck audio
- Subwoofers and high-power home theater
- Commercial, warehouse and 70V PA systems
Is 12 AWG Right for You?
12 AWG is the choice for runs of 100 ft or more, high-power amplifiers, and subwoofers. For runs of 50–100 ft, 14 AWG is usually enough. For runs under 50 ft, 16 AWG works well.
Specifications
- Gauge: 12 AWG
- Conductors: 2, color coded
- Conductor: 99.9% oxygen-free copper (OFC)
- Jacket: PVC, UL CL3 rated
- Lengths: 100 ft, 250 ft
- Color: Black
- Use: Direct burial, outdoor, in-wall
Backed by GEARit
Lifetime warranty and 30-day money-back guarantee. Free shipping on orders $25+.
Specifications
Built to spec.
| Gauge | 12 AWG |
| Conductor | Oxygen-free copper (OFC) |
| Conductors | 2-conductor |
| Jacket rating | CL3 — in-wall rated, outdoor / direct-burial jacket |
| Length | 100 Feet, 250 Feet |
| Brand | GEARit |
| Warranty | Lifetime warranty |
Best for
When to choose 12 AWG
High-power amps and long runs of 100–150 ft, where you want minimal voltage drop.
- Built for outdoor and buried runs
- Pure copper for lower resistance
Why this wire
Made for clean installs and clear sound.

for Direct Burial
2-Conductor Speaker Wire

Made for home improvement projects to business settings
High Performance 12AWG Speaker Wire

Speaker wires that can make your job easier
Easy to Strip and Set Up

Oxygen-Free Copper Cable

Direct Burial for a Clean Look
Complete the install
Pairs well with
13% off
10% off
GEARit
GEARit - 12 AWG In Wall Speaker Wire - CL2 Rated - Oxygen Free Copper (OFC), White
3 options
18% off
GEARit
GEARit - 14 AWG OFC 14/2 Outdoor Speaker Wire UL CL3 Direct Burial Black
4 options
Buyer's guide
Not sure about gauge? Two questions decide it.
How long is the run and how much power the amp pushes. Use the picker, then choose the conductor.
1Pick the gauge
Gauge picker
Tell us the run. We'll size the wire.
·Or use the reference table
| Gauge | Best run length | Best for | Shop |
|---|---|---|---|
| 10 AWG | 150 ft+ | Subwoofers, whole-home, large outdoor | Shop → |
| 12 AWG | 100–150 ft | High-power amps, long runs | Shop → |
| 14 AWG | 50–100 ft | Home theater 5.1 / 7.1 | Shop → |
| 16 AWG | Under 50 ft | Bookshelf, rear surrounds | Shop → |
| 18 AWG | Short jumpers | Low-power, jumpers | Shop → |
- CL2 jacket for in-wall and in-ceiling runs
- CL3 jacket for outdoor or direct-burial runs
- Marine wire for boats, docks and salt air
- Step up one gauge if you're unsure
2Pick the conductor
OFC vs CCA: which conductor fits your install?
Longer runs to surrounds and higher receiver power benefit from pure copper's lower resistance.
Shop OFC speaker wire| Spec | OFC · Oxygen-free copperPick | CCA · Copper-clad aluminumPick |
|---|---|---|
| Conductor | Solid copper strands | Aluminum core, copper skin |
| Resistance | Lowest | Higher than OFC |
| Best run length | Long runs, 100 ft+ | Under 50 ft |
| Power handling | Any amp | Low to mid power |
| Best for | Home theater · in-wall · outdoor | Budget DIY · car audio |
FAQ
Speaker wire questions, answered.
How do I choose the right length?
Measure the path the wire will actually follow, around furniture, along baseboards or through walls, then add 10–15% for slack. If you're between two lengths, go longer.
What gauge speaker wire do I need?
Under 50 ft, 16 AWG is fine. For 50–100 ft or higher-power amps, step up to 14 AWG. For runs over 100 ft or subwoofers, use 12 AWG. In-wall installs need a CL2 or CL3 jacket.
Can I run this speaker wire in walls?
Wire rated CL2 or CL3 is made for in-wall and in-ceiling installation. Check the rating in the specs above and on the jacket.
Is OFC better than CCA?
Oxygen-free copper has lower resistance than copper-clad aluminum, which matters most on long runs and at higher power. CCA is a budget option for short indoor runs.
Do I need banana plugs?
No. Bare wire works on any speaker terminal. Banana plugs make swaps faster and prevent fraying.
